security guard cabin

SPECIFICATION OF SECURITY GUARD CABIN

1). BASE : 50mm x 50mm square pipe, cross member of 50mm x 50mm square pipe, with 18mm marine ply / 18mm cement board and vinyl flooring.
2). ROOF : Top outer curved type M.S.1.2mm (18swg) plain sheet welded with M.S. Frame structure, top inner decorated with 9mm Pre laminated board.
3). CAGE STRUCTURE & WALL PANEL : MS Frame work with square pipe & wall thickness 50mm.
EXTERIOR WALL: M.S. 1.2mm. Bended sheet welded on M.S. Frame.
INTERNAL WALL: All void within the external wall, inner wall & roof are filled with R.B. Glass Wool of 50mm. thick which possess a rare combination of lower thermal conductivity & high resistance to moisture & heat.
4). INSULATION : All void within the external wall, inner wall & roof are filled with R.B. Glass Wool of 50mm. thick which posses a rare combination of lower thermal conductivity & high resistance to moisture & heat.
5). DOOR : Frame work of 30mm x 30mm square pipe external wall made by M.S. sheet & inner wall decorated with 9mm Pre laminated board & suitable locking system.
6). WINDOW : Window shall be of aluminum black powder coated double shutter sliding type, with dark float glass.
7). PAINT : All components are washed thoroughly with epoxy thinner, joints filled with carpage and then painted with epoxy red oxide both outside/inside & then painted with two coats of epoxy paint. (This is done to give an aesthetic look to the cabin and it also has a longer life compared to other paints.)
8). ELECTRICAL : All electric wiring will be concealed & fitted with ISI marked branded modular switches & sockets, fans, tube lights & bulk head light above the door will be provided.