PortaBLE TOILET Cabin

SPECIFICATION OF PORTABLE TOILET CABIN

1). BASE : 50mm x 50mm square pipe, cross member of 50mm x 50mm square pipe, with 18mm marine ply / 18mm fiber cement board and vinyl flooring.
2). ROOF : Top outer curved type M.S.1.2mm (18swg) plain sheet welded with M.S. Frame structure, top inner decorated with 9mm Pre laminated board.
3). CAGE STRUCTURE & WALL PANEL : MS Frame works with square pipe & wall thickness 50mm.
EXTERIOR WALL : M.S. 1.2mm. Bended sheet welded on M.S. Frame.
INTERNAL WALL : Will be decorated with 9mm Pre laminated board.
4). PLUMBING : All plumbing work will be concealed.
5). DOOR: Frame work of 30mm x 30mm square pipe external wall made by M.S. sheet & inner wall decorated with 9mm Pre laminated board & suitable locking system.
7). PAINT : All components are washed thoroughly with epoxy thinner, joints filled with carpage and then painted with epoxy red oxide both outside/inside & then painted with two coats of epoxy paint. (This is done to give an aesthetic look to the cabin and it also has a longer life compared to other paints.)
9). ELECTRICAL :All electric wiring will be concealed & fitted with ISI marked branded modular switches & sockets, fans, tube lights & bulk head light above the door will be provided.